LOCATION:HOME > PRODUCT CENTER > Switches > L3 Managed Switches > SGX3528S-V2

SGX3528S-V2

The SGX35XX-V2 series switch is an L2+ managed 10-Gigabit switch, providing 24/48 Gigabit ports and 4/6 10G SFP+ ports, which can be used to connect upstream devices with higher bandwidth. Using store-and-forward technology, combined with dynamic memory allocation, ensure that bandwidth is effectively allocated to each port. With flow control, it can effectively avoid data packet loss. The backup and redundancy capabilities of the line can be realized through load balancing technology. The product has rich business features and is widely used in the access of enterprise networks and campus networks to build high-performance, easy-to-manage, easy-scalable, and low-cost Gigabit-to-desktop solutions for users. Built-in high-reliability and wide-voltage input design power supply, even if the grid voltage is unstable, it can ensure that the equipment can work normally.
MORE+
Share:
​■    Various Port Types and Flexible Port Expansion
Switch comes with fixed 4/6*10G ports The series also provides multiple gigabit ports.

■    Excellent Processing capability
Up to 216Gbps switching capacity and 161Mpps liner filtering and forwarding speed

■    Comprehensive Security Control Policies
Support address authentication based on IP +MAC addresses, 802.1x authentication, radius and TACACS+ based on user interfaces, and also support IP ACL, MAC ACL, VLAN ACL and L3 / L4 based ACL, can efficiently defend against ARP attacks and viruses. Besides,the switch can provide comprehensive storm control function by suppress broadcast, multicast, DLF flooding and ICMP flooding. The comprehensive secure controls can efficiently guarantee the real-time effectiveness of all security policies.

■    Enhanced Reliability Protection Mechanism
Support CPU packed classification and rate restriction by CPU protection policies, which can prevent against illegal Packet attacks to CPU and reduce the resource consumption.
Support Rapid Spanning Tree Protocol (RSTP), provide rapid convergence and improved fault-tolerant capacity. The network sable operation and load balance are well guaranteed, also improved the reasonable use network channels and redundant link.
Carrier-class switching power supply, supporting functions to prevent against lightning, overpressure and surging. The device can work normally in bad natural weather and instable voltage environment, suitable for 110~240V voltage.

■    Convenient and Quick Management and Maintenance
Adopt simple visual Web-based interface (http / https), which helps users to handle various functions easily and conveniently. 
Support Simple Network Management Protocol (SNMP) that the devices are convenient to configure and manage. Small and medium-sized enterprise customers can centralized manage the switch easily.
Support CLI command line management and telnet, suitable for professional network administrators.
Support SSH2.0 and other encryption, which makes management much more secured.
Support PDP/LLDP protocol for simpler management.
Support NTP protocol for time synchronization automatically.
Support resetting to factory defaults, which makes the maintenance more easily.
Product Information
Product Model SGX3528-V2 SGX3528S-V2 SGX3554-V2
Hardware specifications
Fixed Ports 24*10/100/1000 Base-T ports
4* 1G/10 GE Base-X SFP+ ports
24*1000 Base-X SFP ports
4*10/100/1000 Base-T combo ports
4* 1G/10 GE Base-X SFP+ ports
48*10/100/1000 Base-T ports
6*1G/10 GE Base-X SFP+ ports
Consloe 1
Reset 1
Port Switching capacity 128Gbps   128Gbps   216Gbps  
Box Switching capacity 350Gbps    350Gbps    350Gbps   
Forwarding Rate 96Mpps 96Mpps 161Mpps
Flash/RAM 32MB/256MB
Temperature Operating temperature: (-10 - 50)°C
Storage temperature: (-40 - 70)°C
Humidity Operating humidity: (10% - 90%) RH, non-condensing
Storage humidity: (5% - 90%) % RH, non-condensing
Dimensions(L*W*H) 440(L)*210(W)*44.5(H)mm 440(L)*210(W)*44.5(H)mm 440(L)*285(W)*44.5(H)mm
Power AC:100~240VAC,50~60Hz,12V/6A
Power consumption 36W 36W 72W
Weight <5 Kg <5 Kg <6Kg
Lightning protection 6KV
MAC address table 16K 16K 32K
 

Software specifications
Forwarding mode Store-and-forward
MAC Address Static configuration and dynamic MAC learning(16K)
MAC browsing and removal
Configurable aging time of the MAC address
Jumbo frame 12K
Port Characteristics Support outbound and inbound port speed limit
Support outbound and inbound port speed limit
IEEE 802.3x traffic control for Full-Duplex mode
Back-pressure traffic control for Half-Duplex mode
Storm suppression for unknown Unicast, multicast, multicast, broadcast type
Storm suppression based on bandwidth regulation and storm filtering
Port Aggregation Support port aggregation
Support static aggregation
Support dynamic aggregation(LACP)
Support source MAC payload
Support destination MAC payload
Support based on source and destination MAC load
Support load based on IP address
VLAN 4K support VLAN
Port-based VLAN
MAC-based VLAN 
Protocol-based VLAN 
VLAN based on IP subnet 
Voice VLAN 
802.1ad(QinQ)fixed
Layer 2 Ring Network Protocol 802.1d STP, 802.1w RSTP, 802.1s MSTP
Port Fast, Uplink Fast, Backbone Fast
BPDU Guard, BPDU Filter, Root Guard
Standard ERPS
ERPS single ring single instance
ERPS single-ring multiple instances
IP Routing(IPv4) Inter vlan Multi IP
Default route
Policy routing
Static routing
IPv6 IPv6-Ping,IPv6-Tracert,IPv6-Telnet,IPv6-TFTP,IPv6-ICMP
Multicast IGMP V1/2(Snooping)
IGMP Proxy
DHCP DHCP Server
DHCP Client 
DHCP Relay
DHCP Snooping
Mirror Support port mirroring for incoming port packets
Support port mirroring for outgoing port packets
Support port mirroring for inbound and outbound packets
Support multi-to-one destination port mirroring
Support CPU mirroring
ACL/QoS Access list based on source mac
Mac access list based on ethertype
Ip access list-standard ACL
Whether to support the access list of the time period
ACL verification of source IP address
ACL verification of the destination IP address
ACL verification of source port
ACL verification of the destination port
Support 802.1P (CoS) priority marking
Support DSCP priority re-marking
Support 802.1P/DSCP priority mapping
Support Qos based on COS/DSCP
Support 8 queues
Support SP, WRR, SP+WRR and other scheduling modes
Support congestion avoidance mechanisms such as Tail-Drop and WRED (*)
Safety Features Support port-based 802.1X local authentication
Support 802.1X remote authentication
Support port-based MAC address filtering
Authentication based on MAC address
Support Radius authentication
Loop detection (private)
Support port isolation
Single port isolation
Multiple groups of port isolation
Port security
ARP Aing/Bnding/Proxy
Support storm suppression for multicast/unknown unicast/broadcast
Energy saving IEEE 802.3az
Management and Maintenance CLI: Console, Telnet, SSHv1/2
Web-GUI: HTTP, HTTPS
SNMPv1/v2
SNMP Alarm/Inform/Traps
RMON
Support LLDP
NTP v1/2
System log (operation log, alarm log)
Support user hierarchical management and password protection
Support restore to factory mode
Debugging
 
Product Information Detailed information
SGX3528-V2 24*10/100/1000 Base-T ports, 4* 1G/10 GE Base-X SFP+ ports
SGX3528S-V2 24 *1000 Base-X SFP ports, 4*10/100/1000 Base-T combo ports, 1G/10 GE Base-X SFP+ ports
SGX3554-V2 48*10/100/1000 Base-T ports,6* 1G/10 GE Base-X SFP+ ports
 
TOP