| Product Information | |
| Product Model | ISG2510P |
| Hardware specifications | |
| Ports | 8*10/100/1000 Base-T ports(POE/POE+) 2* 1000 Base-X SFP ports. |
| Consloe | 1 |
| Operating temperature | -40~80°C |
| Storage temperature | -40~85°C |
| Relative humidity | 5%~95% No condensation |
| Power characteristics | Output : DC 48-57V Support dual power supply redundancy Support built-in overcurrent 4.0A protection Support reverse connection protection |
| Packet buffer | 4.1M |
| MAC Address | 16K |
| Whole machine power consumption | <10W(No load) |
| Network protocol | IEEE802.3 10BASE-T.IEEE802.3i 10Base-T.IEEE802.3u.100Base-TX/FX.IEEE802.3ab 1000Base-T.IEEE802.3z 1000Base-X.IEEE802.3x.IEEE802.af.IEEE802.at. |
| Industry Standard | EMI :FCC Part 15 Subpart B Class A,EN 55022 Class A EMS :IEC(EN)61000-4-2(ESD):±8kV contact discharge,±15kV air discharge IEC(EN)61000-4-3(RS):10V/m(80~1000MHz) IEC(EN)61000-4-4(EFT):power cable:±4kV.data cable : ±2kV IEC(EN)61000-4-5(Surge):power cable:±4kV CM/±2kV DM . data cable:±2kV IEC(EN)61000-4-6(Radio frequency conduction):3V(10kHz~150kHz),10V(150kHz~80MHz) IEC(EN)61000-4-16(Common mode conduction):30V cont. 300V,1s IEC(EN )61000-4-8 Shock:IEC 60068-2-27 Freefall:IEC 60068-2-32 Vibration:IEC 60068-2-6 |
| Mechanical properties | Housing: metal Installation: DIN rail type, wall-mounted installation Cooling method: natural cooling, no fan |
| Size | 179(L)*134(W)*46(H)mm |
| Protection level | IP40 |
| Mean time between failures | 300,000 hours |
| Software specifications | ||
| Forwarding mode | Store-and-forward | |
| Protocol and Standards | IEEE 802.3, 10 Base-T Ethernet. | |
| IEEE 802.3u,100 BASE-TX. | ||
| IEEE 802.3ab,1000 BASE-T. | ||
| IEEE 802.3z,1000 BASE-X. | ||
| IEEE 802.3az,EEE(Energy Efficient Ethernet). | ||
| MAC Address | 16K MAC addresses,Support auto-update, two-way learning | |
| VLAN | Based Port VLAN | |
| Up to 4096 VLAN | ||
| VLANs based on IEEE 802.1q | ||
| Spanning Tree | STP Spanning Tree Protocol | |
| RSTP Rapid Spanning Tree Protocol | ||
| Port Aggregation | 8 aggregation groups,each containing up to 8 ports. | |
| Port Mirroring | Send and receive two-way port mirroring | |
| Ring network protocol | support | |
| Support ring protection | ||
| Support for Downward Multiring | ||
| Port Isolation Port stream control |
Downlink ports are isolated from each other and can communicate with uplink | |
| Half duplex based on backpressure control | ||
| Full duplex based on PAUSE frames | ||
| Port speed limit | Port Based Input / Output Bandwidth Management | |
| Multicast control | IGMPv1/2/3 and MLDv1/2 Snooping | |
| IPv6 | Pingv6 | |
| DHCP | DHCP Snooping | |
| Storm suppression | Storm suppression for unknown Unicast, multicast, multicast, broadcast type | |
| Storm suppression based on bandwidth regulation and storm filtering | ||
| Security features | Based on Vlan, MAC binding | |
| ACL Based on IP and MAC | ||
| Security limit on the number of MAC addresses based on ports | ||
| QOS | 802.1 P Port Queue Priority Algorithm | |
| Cos/Tos,QOS tags | ||
| WRR (Weighted Round Robin) | ||
| Line order | Auto-MDIX, Automatic identification of straight and cross lines | |
| Ping Detection | IPv4/IPv6 Ping Detection | |
| Modalities for consultation | Port automatic negotiation | |
| System maintenance | Detection of connectivity | |
| Upgrade package upload | ||
| See System log | ||
| WEB factory configuration restored | ||
| Management | WEB-based interface management | |
| Telnet | ||
| CLI Management (Command Line Interface) | ||
| SNMP | ||
| Product Information | Detailed information |
| ISG2510P | 8*10/100/1000 Base-T ports(POE/POE+) , 2* 1000 Base-X SFP ports. |