ISG25xxP Series industrial poe switches_2.5G Switch， L2+/L3 Switch， POE Switch，Industrial Switch，Management Switch， WIFI 6 Router，Networking Supplier，IOT Security Switch，Manufacturer China

LOCATION：HOME > PRODUCT CENTER > Industry Switches > L2 Managed Industry Swtiches > ISG25xxP Series industrial poe switches

ISG25xxP Series industrial poe switches

The ISG25xxP series is a full Gigabit, layer 2 managed industrial switch. It supports 4/8/16/28 Gigabit electrical ports and 2-16 Gigabit optical ports. It supports the Ethernet layer 2 protocol required for industrial sites, ensuring the stability of the communication network. This series of switches adopts a low-power, fanless design to ensure no noise interference. It also supports an operating temperature range of -40 to 80℃ and good EMC (Electromagnetic Compatibility) performance, ensuring stable operation in harsh industrial environments. It provides a safe and reliable solution for establishing fast and stable network terminal access networks in industrial applications such as factory automation, intelligent transportation, and video surveillance.

MORE+

Strong "core"
The international mainstream industrial-grade high-performance switching chip is adopted, and all components are in accordance with industrial-grade standards to ensure that the product works stably in various harsh environments.

Hardware protection
The working temperature of -40℃-85℃, whether it is severe cold or scorching heat, meets the application requirements of harsh industrial environments.
It meets the EMC4 standard, IP40 or higher protection level, and has strong dust-proof, anti-seismic, anti-interference and anti-corrosion capabilities to ensure stable operation under various harsh working conditions.

Convenient design
Using fanless heat conduction design and holeless heat dissipation technology, the equipment has an average failure time of more than 30 years, which is more durable
The uplink port adopts a gigabit photoelectric hybrid design, and the optical port uses an SFP interface, which is convenient for common optical fiber port applications.

Industry business characteristics
Supports autonomous ring network redundancy technology, the failure recovery time is less than 20ms, greatly enhances the equipment and network reliability, eliminates single points of failure, and avoids communication terminals.
The primary and secondary loop protection can effectively prevent the entire network loop caused by wrong construction and artificial connection.

Software security protection strategy
It supports flexible binding of MAC, IP, VLAN, and PORT in any combination, effectively preventing illegal users from accessing and accessing the network.

Various management methods
Support CLI command line configuration mode in Telnet and Console.
Support Web, SNMP configuration mode, more convenient realization of equipment network management.

Ø Hardware for products with 24 ports or less

project	ISG2506P	ISG2510P	ISG2512P	ISG2516TSP	ISG2518P	ISG2520P
Fixed port	410/100/1000 Base-T ports 21000 Base-X SFP ports.	810/100/1000 Base-T ports 21000 Base-X SFP ports	810/100/1000 Base-T ports 41000 Base-X SFP ports	810/100/1000 Base-T ports 81000 Base-X SFP ports	1610/100/1000 Base-T ports 21000 Base-X SFP ports	1610/100/1000 Base-T ports 41000 Base-X SFP ports
Switching capacity	128Gbps	128Gbps	336Gbps	336Gbps	336Gbps	336Gbps
Packet forwarding rate	102Mpps	102Mpps	126Mpps	126Mpps	126Mpps	126Mpps
Operating temperature	-40~80°C
Storage temperature	-40~85°C
relative humidity	5%–95% non-condensing
Power characteristics	Input voltage::DC 48-57V(POE) Supports dual power supply redundancy Supports built-in 4.0A overcurrent protection. Supports reverse connection protection
Packet buffer	4.1M
MAC address	8K
Overall power consumption	<10W	<10W	< 15 W	< 15 W	< 15 W	< 15 W
Network Protocol	IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u; 100Base-TX/FX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x;
industry standards	EMI:FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC(EN)61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge IEC(EN)61000-4-3(RS): 10V/m(80～1000MHz) IEC(EN)61000-4-4(EFT): Power supply: ±4kV; Data supply: ±2kV IEC(EN)61000-4-5(Surge): Network port: ±4kV CM//±2kV DM IEC(EN)61000-4-6 (Radio Frequency Conducted): 3V (10kHz～150kHz), 10V (150kHz～80MHz) IEC(EN)61000-4-16 (Common Mode Conduction): 30V cont. 300V, 1s IEC(EN)61000-4-8 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6
Mechanical properties	Casing: Metal casing Installation: DIN rail mounting, wall mounting Cooling method: Natural cooling, fanless
Dimensions (L * W * H )	144 * 105 * 48mm	19613554mm	145* 125* 48mm	176 * 135 * 46 mm	176 * 135 * 46 mm	16613769 mm
LED indicator	Power indicator light: PWR Interface indicator lights: Electrical port, optical port (Link/ACT)
Protection level	IP40
Mean Time Between Failures	300,000 hours

Ø Hardware for products with 24 or more ports

project	ISG2528C
Fixed port	2410/100/1000 Base-T ports 410/100/1000 Base-T ports 4*1000 Base-X SFP ports(COMBO)
Switching capacity	336Gbps
Packet forwarding rate	126Mpps
Operating temperature	-40~80°C
Storage temperature	-40~85°C
relative humidity	5%–95% non-condensing
Power characteristics	Input voltage: DC 36 - 72 V or input voltage: AC 110 - 220 V Supports built-in 4.0A overcurrent protection. Supports reverse connection protection
Packet buffer	4.1M
MAC address	16K
Overall power consumption	< 20W
Network Protocol	IEEE802.3 10BASE-T; IEEE802.3i 10Base-T; IEEE802.3u; 100Base-TX/FX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x;
industry standards	EMI:FCC Part 15 Subpart B Class A, EN 55022 Class A EMS: IEC(EN)61000-4-2 (ESD): ±8kV contact discharge, ±15kV air discharge IEC(EN)61000-4-3(RS): 10V/m(80～1000MHz) IEC(EN)61000-4-4(EFT): Power supply: ±4kV; Data supply: ±2kV IEC(EN)61000-4-5(Surge): Network port: ±4kV CM//±2kV DM IEC(EN)61000-4-6 (Radio Frequency Conducted): 3V (10kHz～150kHz), 10V (150kHz～80MHz) IEC(EN)61000-4-16 (Common Mode Conduction): 30V cont. 300V, 1s IEC(EN)61000-4-8 Shock: IEC 60068-2-27 Freefall: IEC 60068-2-32 Vibration: IEC 60068-2-6
Mechanical properties	Casing: Aluminum casing Installation : Rack mount Cooling method: Natural cooling, fanless
Dimensions (L * W * H )	44232544mm
LED indicator	Power indicator light: PWR Interface indicator lights: Electrical port, Optical port (Link/ACT)
Protection level	IP40
Mean Time Between Failures	300,000 hours

Project	Function
Monitoring function	You can view information such as device model, serial number, MAC address, hardware version, software version, system time, runtime, CPU utilization, and memory utilization.
Monitoring function	Supports port statistics
VLAN function	Supports management VLANs
	Supports management IP configuration
	Supports port VLANs
	Supports VLANs in IP subnets
	Supports MAC VLAN
	Supports Voice VLAN
	Support GVRP
Port Function	Port configuration supported
	Support port aggregation
	Support port mirroring
	Supports port rate limiting
	Support port isolation
	Supports port energy saving
Scene Function	Supports MAC configuration (static binding and dynamic binding).
	Supports DHCP Snooping
	Support IGMP-Snooping, MLD Snooping
	Supports LLDP configuration
	Supports QoS configuration
	Support Jumbo Frame
Security features	Support ARP configuration
	Support storm control
	Supports ACLs (based on IP, MAC, and time).
	Supports anti-attack measures (DOS, Icmp-echo).
	Supports DHCP Snooping
	Supports 802.1X
	Supports Radius certification
Ring network function	Support STP
	Support RSTP
	MSTP supported
	Support ERPS
Fault diagnosis function	Support loop protection
	Support log management
	Supports Ping detection
	Supports route tracing
	Supports line detection
Device management function	Supports HTTP/HTTPS
	Supports TELNET
	Supports SNMP
	Support RMON
Equipment maintenance function	Supports system time (local and NTP).
	Supports account management (hierarchical account management and password protection).
	Supports configuration management (configuration import, export, factory reset).
	Support system upgrades
	Support device restart

Equipment Model	Equipment Information
ISG2506P	410/100/1000 Base-T ports (POE/POE+) 21000 Base-X SFP ports. Din-rail Input Voltage:DC48~57V No power supply (optional power adapter or external DC power supply)
ISG2510P	810/100/1000 Base-T ports (POE/POE+) 21000 Base-X SFP ports. Din-rail Input Voltage:DC48~57V No power supply (optional power adapter or external DC power supply)
ISG2512P	810/100/1000 Base-T ports (POE/POE+) 41000 Base-X SFP ports. Din-rail Input Voltage:DC48~57V No power supply (optional power adapter or external DC power supply)
ISG2516TSP	810/100/1000 Base-T ports (POE/POE+) 81000 Base-X SFP ports. Din-rail Input Voltage:DC48~57V No power supply (optional power adapter or external DC power supply)
ISG2518P	1610/100/1000 Base-T ports (POE/POE+) 21000 Base-X SFP ports. Din-rail Input Voltage:DC48~57V No power supply (optional power adapter or external DC power supply)
ISG2520P	1610/100/1000 Base-T ports (POE/POE+) 41000 Base-X SFP ports. Din-rail Input Voltage:DC48~57V No power supply (optional power adapter or external DC power supply)
ISG2528CP	2410/100/1000 Base-T ports (POE/POE+) 410/100/1000 Base-T ports 4*1000 Base-X SFP ports(COMBO) 1U,19inch 450W power supply
Optional AC power adapter	Adapter parameters
PWR-DC-65W	Input Voltage:170～264VAC,Output voltage:52V/1.25A.maximum power:65W
PWR-DC-120W	Input Voltage:170～264VAC,Output voltage:52V/1.5A.Maximum power:120W

Switches

PoE Switches

Industry Switches

Business Router

Access Points

Management Platforms

Other

ISG25xxP Series industrial poe switches